Adash A4500 VA5 Pro Vibration Analyzer & Data Collector

Description

Adash A4500 VA5 Pro Vibration Analyzer & Data Collector

Adash A4500 VA5 Pro Vibration Analyzer & Data Collector Kit have been configured to give the user access to all essential hardware and software basics for a cutting edge vibration analysis program. Purchase of a VA5 Base Kit provides the user with all the logistical gear for safe transport of the analyzer and its accessories, including a leather cover, shoulder strap and hard-shell carrying case. For more advanced analysis capabilities, the VA5 Pro Kit provides a licensed seat to the professional version of Adash’s Digital Diagnostics Software (DDS).

Features

Adash A4500 VA5 Pro Four Channel Vibration Analyzer:
Sampling mode: fully simultaneous for 4 channels
4 AC inputs for vibration measurement
4 DC inputs for process values measurement
Tacho input (speed/trigger)
Input range:
AC +/- 12V peak-peak
DC +/- 24V
AD conversion: 24 bit, 64 bit internal signal processing (no auto-gain)
Frequency ranges (-3dB):
maximum range: 0.35 Hz – 90 kHz (1 Ch, 194 kHz sampling)
maximum range: 0.35 Hz – 25 kHz (4 Ch, 64 kHz sampling)
minimum range: 0.35 Hz – 25 Hz (4 Ch, 64 Hz sampling)
FFT Resolution: 3,276,800 lines
Memory/Route: 64GB max. 16GB for one route
USB 3.0 (2.0 compatible)
Operating temperature range: -10 to 50˚C
Lithium Ion battery: 8 hours of operation, AC 230V
Touch screen display
Built in camera (thermal imaging camera sold separately)

The Adash A4500 VA5 Pro Four Channel Vibration Analyzer is a powerful, portable vibration analyzer with thermal imaging and ultrasound capabilities. The A4500 VA5 Pro is compatible with triaxial sensors, and can simultaneously measure up to four vibration signals, four process values and speed. This program runs with FFT with a resolution maximum over 3.25 million lines. Featuring a 9 inch touch screen display and 64GB of storage, the A4500 VA5 Pro has plenty of memory for extensive data collection and analysis, with a user-friendly interface that makes on site review a breeze.

Unit modes:

Vibration Analyzer – analytical measurements
Data collector – route measurements
Balancer – 1 and 2 plane on site balancing
IR Camera – thermal imaging
Run up – run up and coast down measurements
Recorder – raw signal recording for later post analysis
MCSA – Motor Current Signature Analysis Stethoscope – listening of the bearing/machine noise FASIT – expert system for automatic fault detection
Octave analyzer – hearable sound measurements
Bump test – measurement of natural frequencies
ADS – Animated Deflection Shapes (Operating deflection shapes)
Ultrasound – measurement of ultrasound in 30 – 50 kHz range
Lubri – Monitoring and Control of Lubrication Process
Camera
Gallery